• APPLICATION - ENGINE LUBRICANTS
• ENGINE TYPE -  4-STROKE
• PRODUCT TYPE - 8100
• QUALITY - 100% SYNTHETIC, SYNTHESE-TECHNOLOGY
• PRODUCT RANGE - CAR
• VISCOSITY - 0W-20
• API STANDARDS - API SERVICE SP-RC

100% Synthetic "Fuel Economy" engine oil specially designed for recent gasoline engines, naturally aspirated or turbocharged, indirect or direct injection, designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (≥ 2.6 mPa.s).
Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SP-RC, API SP and/or ILSAC GF-6A standards).
Recommended for all GM gasoline engines requiring GM-dexos1^™ GEN3 specification: BUICK, CADILLAC, CHEVROLET, GM, GMC, OPEL and VAUXHALL.
Catalytic converter friendly.
This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.

MOTUL 8100 ECO-LITE 0W-20
Fuel Economy Gasoline engine lubricant 100% Synthetic

TYPE OF USE
100% Synthetic "Fuel economy" engine oil specially designed for recent gasoline engines, naturally aspirated or turbocharged, indirect or direct injection, designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (≥ 2.6 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SN and/or ILSAC GF-5 standards). Approved GM-dexos1™ GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, GMC, OPEL and VAUXHALL. Catalytic converter friendly. This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.

PERFORMANCES

STANDARDS 

API SERVICE SN / CF

ILSAC GF-5

The API SN standard is fully backward compatible over API SM requirements and all former API standards. API SN lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, antiwear protection and enhanced performance at cold temperature during the whole oil life span. Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2 ) emissions.

RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use. MOTUL 8100 Eco-lite 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.

PROPERTIES
Viscosity grade SAE J 300 SAE 0W-20
Density at 20°C (68°F) ASTM D1298 0.842
Viscosity at 40°C (104°F) ASTM D445 45.2 mm²/s
Viscosity at 100°C (212°F) ASTM D445 8.4 mm²/s
Viscosity index ASTM D2270 162.0
HTHS viscosity at 150°C (302°F) ASTM D4741 2.6 mPa.s
Pour point ASTM D97 -42.0 °C / -44.0 °F
Flash point ASTM D92 223.0 °C / 433.0 °F
TBN ASTM D2896 8.4 mg KOH/g