Motul MOTYLGEAR 75W-80 Semi Synthetic (Manual Transmission) / 5L
MOTUL

Motul MOTYLGEAR 75W-80 Semi Synthetic (Manual Transmission) / 5L

Rs 1,925.00 In Stock Sold out
Add to wishlist Added to wishlist
Info:
For all European Vehicles

1-21 DAYS DELIVERY

100% ORIGINAL AND QUALITY

QUALITY PART GUARANTEE

  • Description

Motul MOTYLGEAR 75W-80 / 5L

 

Application: Transmission
Engine Type: Manual
Product Type: MOTYLGEAR
Quality: TECHNOSYNTHESE
Viscosity: 75W-80
API Standards: API GL-4, API GL-5, MIL-L 2105 D
  • APPLICATION - TRANSMISSION FLUIDS
  • QUALITY - TECHNOSYNTHESE®
  • PRODUCT RANGE - CAR
  • VISCOSITY - 75W-80
  • API STANDARDS - API GL-4, API GL-5

Specially recommended for gearboxes hard to shift and Peugeot, Citroën, Renault… gearboxes.

All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

MOTUL MOTYLGEAR 75W-80

Gearbox lubricant Technosynthese®

TYPE OF USE

Specially recommended for gearboxes hard to shift and Peugeot, Citroën, Renault… gearboxes. All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.


PERFORMANCES

STANDARDS: API GL-4 / API GL-5

MIL-L 2105 D

Extreme Pressure lubricant for an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. Stays in 80 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard. Very high lubricating power which decreases friction and wear. 80 viscosity grade at hot temperature reduces gearbox drag and then fuel consumption. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.

RECOMMENDATIONS

Oil change: According to manufacturers' requirements and adjust according to your own use.

PROPERTIES
Viscosity grade SAE J 306 75W-80
Density at 20°C (68°F) ASTM D1298 0.878
Viscosity at 40°C (104°F) ASTM D445 58.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 10.1 mm²/s
Viscosity Index ASTM D2270 160 
Pour point ASTM D97 -36.0 °C / -32.0 °F
Flash point ASTM D92 204.0 °C / 399.0 °F

Recently Viewed